|
The peripherals for electric locks are essential and can upgrade the performance of the access control system , e.g. door loop , surface mount housing , interlock module ....etc.
|
|
|
|
The Door Loops are wire extension protectors that you install on door frame. It gives attractive and neat result for the wiring. The length of DL-350 and DL-200 metal hose is 40 cm respectively.
|
|
 |
LS-1802GF Door Latch
|
|
LS-1000 Auxiliary Mortise Door Latch
- Applicable to GK series electric strike
- For wooden doors
- Stainless steel faceplate, zinc alloy main stand
- For single-swing doors (left-hand or right-hand)
 Catalogues (pdf) |
 |
LS-2200 Mechanical Latch
- Patented latchbolt with roller
- Stainless steel faceplate
- Aluminum case
- Compatible with electric strikes
|
|
|
|
ECY-72D Both Side Cylinder
- For Electric Dropbolt 「EB260/M,EB261/M」and Electromechanical Lock 「ML-300」.
|
|
ECY-72S Single Side Cylinder
- For Electric Dropbolt 「EB260/M,EB261/M」and Electromechanical Lock 「ML-300」.
|
|
|
|
SMB-86ALU01
(not Anodized)
SMB-86ALU02
(Anodized and Brushed)
(These models are available by special order)
SMB-86ALU03
(Chromium Plated)
|
|
SMB-050
(Stainless steel housing)
|
|
|
|
|
|
SMB-861
For use with British box in surface mount installation.
(Metal housing)
|
TLM-300S
|
TLM-400S
|
Door Status Indicator with red/green LED light, showing monitoring status.
- Zinc Alloy w/powder coated finish
- Door Status Indicator
- Operating voltage: 12/24VDC
- Current draw : 40mA/12VDC,
50mA/24VDC
- User Guide (pdf)
|
TLM-100MTS
|
TLM-200
|
Door Status Indicator with red/green LED light, showing monitoring status.
TLM-100MTS (Option SMB-040 for surface mount)
TLM-200 British sized (Option SMB-86ALU for surface mount)
- Door Status Indicator
- Operating voltage: 12~24VDC
- Current draw : 40mA/12 VDC, 70mA/24 VDC
- User Guide (pdf)
|
|
FFP-1224
A functional fire panel which connects a Power Supply Unit to a Fire Alarm System.
In case of fire, the power is cut off by the Back-up Battery Pack inside a Power Supply Unit and
the door is unlocked. Connect all cable wires according to the installation sheet provided.
- PSU Interface module for Fire alarm panel
- Power Input:12~24VDC
- Output:12~24VDC
- Relay rated: 6A/125VAC~12A/125VAC;12A/28VDC
- Dimensions: 47(L) x 59 (W) mm
- User Guide (pdf)
|
|
ILM-200
- Interlock Module (2-door)
- Dimensions: 73 (L)x 63 (W)mm
- Relay rated 3A/125VAC, 24VDC
- Power input 12~24VDC, equivalent to Output voltage.
- Operating Temper.: -20~+70o°C
- Humidity: 0~95% non-condensing
- User Guide (pdf)
|
|
PSM-S1A12V
- Waterproof Switching Module
- Power input: 12~28VAC or 12~50VDC
- Power output: 12VDC , 1A
- Efficiency: >70%
- Rip ply: <150mV (DC Input) <150mV (AC Input)
- Line Regulations: 3%
|
|
SM1224-1A
- Mini Voltage Switching Module
- Power Input : 15~24VAC or 16~28VDC
- Power Output : 12VDC, 300mA
- Dimensions : 51(L)*40(W)*15(D)mm
|
|
SM1228
SM1228 Power Transformer Modules is an easy applicable control module. 13-28DC ranging input can be automatically converted to 12DC voltage output.
- Power Transformer Module
- Power Input: 13~28VDC
- Output: 12VDC, 300mA
- Dimensions: 51(L)x40(W)x15(D)mm
|
|
DBR-200
The DBR-200 Relay module works when contacts change from N/C (Normally Close) to N/O (Normally Open).
- Relay Board
- Power Input: 8~30VAC or 11~30VDC
- Current draw: 45mA/12VDC
- Relay Output: Relay rating: 5A/24VDC/240VAC
|
|
GPD-3015-PLUS
- Voltage Distribution Board
- DC voltage evenly distributed to five output contacts
- Each with “PPTC” re-set table fuse protection based on the dynamic equilibrium of energy.
- Each OUTPUT is protected by individual PPTC from over current
- Therefore each load of output may not exceed 1AMP
- The version is application for 2A ~ 5A with 12 ~ 24VDC output Power Supply series.
|
PB-100 Position ball |
|
|
|
|
|
